21 Boho Macrame Wall Hanging Crafts

Disclosure: This post contains affiliate links, which means we may earn a commission if you purchase through our links at no extra cost to you.

I fell into Boho Macrame Wall Hanging Crafts the way you fall into a cozy corner shop: by accident and then with a stubborn, comforting obsession. Knots and fringes filled long afternoons, and the slow rhythm of looping cord became a kind of quiet companionship as I worked on pieces for a sunny wall and a tiny apartment nook.

Over time those experiments turned into a playful collection of styles and textures.

These Boho Macrame Wall Hanging Crafts reflect small moments of curiosity, the smell of cotton, and the soft rustle of fringe in an open window.

Classic feather fringe with soft cotton sway

I always come back to the feather fringe because it feels like a slow exhale. The cotton cords fall into gentle layers that brush like a soft textile breeze, and the way light grazes those tapered edges makes them glow against plaster.

I remember running a hand down a finished piece and smiling at the little tickle of threads. The overall look reads like a weathered textile found in a seaside cottage, warm to the touch and quiet enough to anchor a reading corner without demanding attention.

Steps

1. Gather soft cotton cord, a wooden dowel, scissors, tape measure, and a comb for finishing.
2. Fold cords into pairs and create alternating square knots along the dowel until the desired width is reached.
3. Trim the bottom cords into a long tapered shape and use a comb to gently separate the fibers for a feathery effect.
4. Hang the dowel from twine and let the fringe settle naturally before final trimming.

Dreamy circular macrame with timber hoop accent

A circular piece has always felt a little like holding a small universe in my hands. The timber hoop gives a reassuring roundness while knotted patterns radiate inward, creating places for light to gather and tiny shadows to land.

When I hung one in a narrow hallway it softened the daytime echo and made the space feel calmer. The texture of hand-twisted cord against smooth wood is a comforting contrast, and I often catch myself pausing to watch how the knots catch afternoon sun as clouds move.

Steps

1. Select a wooden hoop, cotton cord in two thicknesses, scissors, and a hanging cord.
2. Attach cords evenly around the hoop and form a repeating knot pattern that radiates toward the center.
3. Add a fringe along the lower arc and trim to shape, smoothing fibers with fingertips.
4. Suspend from a discreet hook using a single matching cord.

Minimalist neutral tapestry on weathered driftwood rod

I love the quiet confidence of a minimalist piece where each cord earns its place. A weathered driftwood rod lends a found-object story, its pale, sand-smoothed surface pairing beautifully with a narrow palette of natural cords.

That contrast between the rugged wood and clean knotting brings a balanced tension to a room. Hanging one above a narrow bench gave the entry a calm, gallery-like presence.

The piece felt like a memory of a beach walk folded into home décor, touchable and unpretentious.

Steps

1. Choose a length of driftwood, natural cotton cord, scissors, and thin comb for finishing.
2. Loop cords over the driftwood in even groups and craft a series of simple square knots to form a streamlined panel.
3. Create a subtle central line with tighter knotting and leave fringes on the sides slightly longer.
4. Hang from two discreet loops at each end of the driftwood for a balanced presentation.

Soft ombre fringes blending gentle color bands

Ombre cords bring a sense of slow motion to a hanging; the colors descend like a quiet tide. I remember hand-dyeing a batch of cotton and watching the blues and blushes bleed into one another on a sunny table.

The finished piece had the warmth of handmade commitment and the fluidity of watercolor, with each fringe band catching light differently. It paired well with rattan furniture and a ceramic vase.

The tactile gradation invites touch, and visitors often pause to trace the soft transition with their eyes.

Steps

1. Prepare cotton cords in lengths suitable for your hanging and select fiber dyes in chosen shades.
2. Dip-dye each group of cords, allowing color to graduate along the strand before rinsing and drying flat.
3. Attach dyed cords to a wooden dowel using lark’s head knots, arranging them in gradient order.
4. Fluff and comb the fringe to reveal the full ombre effect and trim any uneven ends.

Wooden beads threaded through creamy macrame strands

Adding wooden beads to a macrame piece felt like giving it a small wardrobe accent. The smooth, rounded beads sit between cords like warm breaths, catching light and adding a rhythmic pause to the knotwork.

I liked the little click they make when the piece shifts, a tiny sound that gave the wall hanging an additional layer of life. In a sunlit corner the beads warmed to honey tones, creating a pleasing contrast with creamy cotton.

The result reads handcrafted and playful, with subtle movement and tactile charm.

Steps

1. Gather cotton cord, an assortment of wooden beads in different sizes, a wooden dowel, scissors, and a measuring tape.
2. String beads onto selected cords before knotting and secure them within patterns using square knots or wrapped knots to hold them in place.
3. Space beads rhythmically along the panel to create visual pauses and contrast against plain sections.
4. Finish with a fringe below the last row of beads and hang the dowel from a single cord.

Crescent moon silhouette in knotted cord

There is something quietly theatrical about a crescent-shaped hanging. The curve frames space in a way that feels both celestial and domestic, like a tiny moon tucked into a living room.

I once hung one above a bedside basket and the arc softened the shelf lines, casting gentle shadows that changed as the day moved. The knotted texture across the curve appears denser in places, giving depth, while the lower fringe spills like moonlight caught on fabric.

It felt intimate, a piece that invited low lamps and quiet evenings.

Steps

1. Choose a crescent-shaped hoop or create a curve with flexible metal wrapped in cord, then select cotton rope and scissors.
2. Secure cords along the crescent edge and form a pattern of alternating knots that builds density toward the center curve.
3. Add shorter fringe beneath the inner curve and longer fringe beneath the outer curve to emphasize the crescent shape.
4. Attach a discreet hanging cord at the top point and level the piece on the wall.

Leather cords woven for rustic contrast and warmth

Introducing leather into macrame added an unexpected bite to the softness of cotton. The leather ribbons pull a room toward a warmer, slightly rugged feeling, especially when combined with wooden beads or an aged metal bar.

I kept one near a kitchen window where sunlight deepened the leather’s color and the knotted pattern read like handcrafted jewelry on the wall. Touching it reveals a cool, smooth surface contrasted with the fuzzy cotton fringes, and that contrast makes the piece feel candid and lived-in.

Steps

1. Select thin leather lace, cotton cord for contrast, a sturdy hanging bar, scissors, and measuring tape.
2. Anchor leather lace at intervals and weave cotton cords around it using flat knots to integrate the two materials.
3. Alternate bands of leather and cotton to create texture contrast and accent with occasional wooden beads.
4. Finish with a small fringe of cotton and hang the bar securely on the wall.

Sunburst pattern radiating soft tasseled rays

A sunburst pattern feels celebratory without being loud. The central knot cluster acts like a tiny sun, and the tasseled rays spill outward in a way that brightens the space even under low light.

I mounted one over a low bookshelf and it made the whole shelf feel intentional, like each object below had been placed for a small ceremony. The fringe moves slightly when the heater kicks in, creating a soft shuffling sound that always makes me smile.

The overall effect is sunny and quietly joyful.

Steps

1. Choose cotton cords in a single neutral or two coordinating shades, a wooden dowel, and scissors.
2. Create a compact central knot cluster and work outward with radial knotting to form the sunburst lines.
3. Attach tasseled fringe along the outer edges to emphasize the rays and comb the fringe for fullness.
4. Hang the dowel centered above the chosen display area and adjust the rays for balance.

Geometric triangle tapestry with crisp linework

Geometric knotting brought a fresh, architectural edge to my collection. Triangles and crisp lines felt deliberate and modern, but when executed in soft cord the result stayed warm rather than austere.

I placed one over a low console and it created a subtle focal point that didn’t shout. The pattern throws small, angular shadows at midday, and the tactile ridges invite fingers to trace the lines.

It felt like a clean drawing translated into fabric, a small statement that reads both planned and personal.

Steps

1. Prepare cotton cord in a single color or two tones, a wooden dowel, scissors, and a measuring tool.
2. Mark central points on the dowel and arrange cords to form triangle outlines, tightening knots to keep edges defined.
3. Fill triangle interiors with alternating knot textures to create contrast and depth.
4. Trim the lower edge into a straight or angled finish and hang the dowel evenly.

Layered textures using cords of varying thickness

Layering cords with different thicknesses felt like composing a small symphony of texture. Thick rope creates bold ridges while finer strands nestle into tiny valleys, and together they form a landscape across the wall.

I recall the quiet satisfaction of seeing the heavier cords anchor the piece while the lighter ones provided delicate movement. In a corner filled with plants, the layered hanging became a dense visual companion to trailing leaves, both softening the room and offering a tactile focus that invited long glances rather than quick skims.

Steps

1. Select multiple cord weights, a sturdy dowel or branch, scissors, and a tape measure.
2. Arrange thick cords as structural lines and add thinner cords in between, using a combination of square and half knots for textural variety.
3. Create staggered fringe lengths to reinforce the layered effect and gently comb finer cords for softness.
4. Hang the piece and step back to assess the balance of weight and movement.

Pallet wood backdrop paired with knotted fringe

Mounting macrame on a pallet wood panel gave it an instant sense of provenance. The rough-hewn boards read like salvaged history, and knotted fringe softened the hard edges.

I always appreciate how the warmth of aged wood deepens the cord colors, making creams seem richer and dyed hues appear lived-in. The piece looked at home above a hearth or behind a bed, where the wood added an earthy backbone to the textile.

Touching the wood felt like touching a story, and the textile’s softness balanced that sturdiness nicely.

Steps

1. Source a clean pallet wood panel, sand lightly if needed, and select cotton cords and hanging hardware.
2. Secure cords across the top of the panel using wrapped knots or staples from the back to keep a neat front face.
3. Vary knot patterns across the panel to create interest and allow the wood grain to remain visible between sections.
4. Mount the pallet panel on the wall using sturdy hooks and enjoy the combined texture of wood and fiber.

Botanical-dyed cords in earthy green fades

I experimented with botanical dyes and was surprised by how organic the results felt. Greens pulled from leaf and plant extracts created muted, earthy tones that sit quietly on a wall.

The dyeing process left a faint scent of the dyeing materials for a day, which always felt like evidence of handiwork. I hung one against a warm plaster wall and the green fades harmonized with indoor plants, making the room feel gently curated.

The subtle variations along each cord read like a small map of the dye bath’s movement.

Steps

1. Choose natural dye materials, cotton cords, a large pot, gloves, and a dye fixative like salt or vinegar as appropriate.
2. Prepare the dye bath and submerge cord bundles to achieve shaded saturation, lifting some strands sooner for variation.
3. Rinse and dry cords flat to preserve the faded gradients, then attach to a dowel with consistent spacing.
4. Arrange the dyed cords so the color transitions flow naturally and hang in a plant-rich corner.

Looped weaving creating layered tassel cascades

Looped weaving techniques produce a softness that feels almost textile-like, as if a woven shawl had been stretched across the wall. Those loops create volume without weight, offering a plush surface that invites gentle fingers.

I placed one above a child’s reading nook and loved how the lower cascades created a little curtain of texture that buffered sound and added a cozy scale to the space. The piece seemed to absorb a room’s chatter and return a muted calm, which made it my go-to for restful corners.

Steps

1. Choose cotton cord, a sturdy wooden dowel, scissors, and a small comb for finishing loops.
2. Create even lark’s head attachments across the dowel and form large looped knots to build plush volume.
3. Add layered tassels beneath the loops for cascading motion and trim selectively to maintain shape.
4. Hang the dowel at a comfortable height above seating and adjust loops for visual rhythm.

Asymmetrical silhouette that feels wanderer-made and lived-in charm

Asymmetry always brings a sense of story, like the piece was stitched together across different travels. One of my favorites had one long arm of fringe and a compact knotted anchor on the other side; it felt both deliberate and improvised.

The imbalance drew the eye in a slow arc and made the room feel more relaxed. The texture varied along the length, with tight knots at the anchor and looser cords where the fringe spilled.

It looked like a textile that had gathered memories along its threads.

Steps

1. Select cord in a single or complementary palette, a dowel or branch, scissors, and measuring tape.
2. Create a dense knot section on one side and gradually reduce knotting density moving toward the other side to form an asymmetrical silhouette.
3. Allow one side to extend into a long fringe while keeping the opposite edge compact and textured.
4. Hang slightly off-center to emphasize the intended imbalance and view from multiple angles.

Brass rings and mirrors catching warm light elegantly

Incorporating small metal rings and mirror disks added a pinch of shimmer to the cotton textures. The brass catches light in tiny flashes, and mirrors reflect little fragments of the room, making the piece feel interactive.

I remember hanging one near a window and watching the afternoon sun ping off those disks, scattering soft dots onto a nearby plant. The contrast between cool glare and matte fiber is pleasing to the eye and gives a macrame hanging an unexpected jewel-like quality without feeling precious.

Steps

1. Gather cotton cord, small brass rings or metal hoops, tiny mirror accents, a dowel, and pliers for securing metal elements.
2. Attach cords and thread metal rings into the pattern, securing them within knots so they sit flush with the textile.
3. Place mirrors strategically to catch light without overwhelming the knotwork and balance with plain cord sections.
4. Finish by trimming fringe and suspending the dowel where reflected light can interact with the room.

Hoop-mounted macrame with trailing fronds and seedpods

A hoop-mounted design with trailing fronds feels like a small botanical installation. The fronds sway gently and the addition of seedpod charms or dried pods gives a faint rustle when air moves through the room.

I tucked one near a kitchen window where the afternoon breeze teased the fronds and the dried pods made a quiet sound against the cord. The overall impression is of a collected find, a wall piece that reads like part textile and part herbarium, conjuring walks and small foraging trips.

Steps

1. Select a metal or wooden hoop, cotton cord, dried seedpods or small botanical charms, and twine for hanging.
2. Attach cords around the hoop and knot in flowing patterns that create natural-looking fronds.
3. Integrate seedpods by threading them onto select cords and securing with knots so they hang freely within the fronds.
4. Trim fronds to varying lengths to enhance the trailing botanical effect and hang near a window for gentle movement.

Soft chevron waves in layered neutral threads

Chevron patterns feel like a comfortable rhythm, a back-and-forth that the eyes enjoy following. Soft, layered threads in neutral shades give the chevron a relaxed, almost undulating appearance rather than strict geometry.

I placed one above a dining nook and liked how the repeating V shapes echoed in small table arrangements, creating a quiet visual conversation. The edges of each chevron caught light differently, creating tiny bands of shadow that made the piece read as both flat and textured at once.

Steps

1. Choose cotton cords in two or three coordinating neutral shades, a dowel, scissors, and measuring tape.
2. Arrange cords and knot in a repeating sequence that forms V-shaped lines, tightening knots to define each chevron.
3. Add layered fringe below each chevron row to soften the pattern and create gentle movement.
4. Hang the dowel centered above the dining nook or chosen space and adjust knots for symmetry.

Drift-inspired macrame with sea-stained shells and sand-scented memories

Incorporating sea-worn shells felt like bottling a little coastline. The shells’ cool, smooth surfaces contrast with knotted cotton and add a maritime whisper to a hanging.

I strung a few small shells into a lower fringe section and the piece immediately took on a seaside personality, especially when placed near sunlit windows. The shells shift slightly with the air and catch light in different ways, reminding me of a day by water.

The overall effect is gentle and nostalgic, like a pocket of shoreline hung on the wall.

Steps

1. Collect small sea-stained shells, cotton cord, a wooden dowel, and a fine drill or needle for threading shells if necessary.
2. Attach shells to selected cords by threading and securing them within knots so they remain evenly spaced.
3. Combine shell-accented cords with plain cord sections to balance the composition.
4. Hang the dowel in a sunlit spot where the shells can catch light and offer subtle reflection.

Gemstone drops woven into knotted cotton fringe

Small gemstone drops tucked into macrame felt like adding tiny geological surprises. The stones have a cool weight against soft fiber, and their subtle glimmer shifts with the angle of light.

I included a few moonstone and agate drops in a hanging over a bedside table and enjoyed the quiet shimmer in low lamp light. The gemstones also add a sense of personal meaning, like little tokens threaded into a textile diary.

Tactile contrast makes the piece feel carefully composed and a touch magical.

Steps

1. Select small polished gemstones with drilled holes, cotton cord, a sturdy dowel, and pliers if needed.
2. Thread gemstones onto chosen cords before tightening surrounding knots to secure them in place.
3. Space gemstone drops to create visual rhythm and balance with plain knot sections.
4. Finish with an even fringe and hang where light will softly illuminate the stones.

Soft fringe curtain framing a cozy sunlight alcove

A wider panel functioning as a fringe curtain changes how light and movement read in a corner. The soft curtain filters sunlight into fractured ribbons and creates a gentle sense of separation without closing space.

I draped one across a small alcove and loved how it turned the area into a private pocket while still letting air pass. The fringe’s motion is quiet and companionable, and the piece becomes part of everyday rituals, slightly shifting as people move around it and catching stray sunbeams throughout the day.

Steps

1. Measure the opening and prepare an ample amount of cotton cord, a long wooden dowel or rod, scissors, and a ladder if needed.
2. Attach cords densely across the rod using even lark’s head knots to create a curtain-like panel.
3. Trim the fringe to desired uniformity or soft taper and comb sections for fullness.
4. Mount the rod above the alcove so the fringe hangs freely and allows gentle movement.

Mini hoop collection forming a textured gallery

Grouping small hoop hangings felt like composing a miniature gallery of textures. Each hoop carried its own mood—one tightly knotted, another airy and looped—and together they created a playful collage.

I arranged a few over a narrow console and the cluster turned an empty stretch of wall into a curated vignette. The juxtaposition of scales and knot styles kept the eye moving, and the small size made each piece approachable.

It read like a cluster of tiny stories hung in conversation with one another.

Steps

1. Gather a selection of small wooden or metal hoops in varying diameters, cotton cord, scissors, and optional beads or charms.
2. Create distinct knot patterns within each hoop, varying density and fringe length for contrast.
3. Arrange the hoops on the floor to find a pleasing composition before hanging and mark wall locations.
4. Install hooks and hang the hoops at staggered heights to form a cohesive gallery cluster.